Revolution Telescopic RM

 

Rear mounted post drivers are traditionally designed as entry level models as they are simplistic in their base design and scope of movement when compared to a side mounted or rotational design. This being said there is a strong market for rear mounts that offer solidarity and for those people who like the positioning between the tractor tyres or on excavators.

 

The Telescopic RM takes Revolutions Telescopic mast and places it on a sturdy strong rearmount base design. Added features include webbing for a low main hinge point and the use of UHMWPE wear pads and a UHMWPE bush around the 76 mm main hinge pin. The independent valve bank mounting is a huge asset as with all of the Revolution and RAMMER range

 

 Revolutions Telescopic mast creates balance and compactness. The ability to use the Telescopic mast at the height required when posting, lifting green strainers, drive foots into ground level all add up to ease of operation.

 

The Telescopic RM is a good entry level post driver for the telescopic range and appeals to contractors and farmers who want a tidy efficient unit.

Designed by a fencing contractor

 

 

Built by Engineers

 

 

Sold Direct

TELESCOPIC MAST

 

Vertical Mast height extended 5.1m

Vertical Mast height compacted 3.3m

Mast pull out posts/strainers

Will drive to ground level

 

REAR MOUNT BASE

 

Robust base

76mm main hinge pin with UHMWPE antiwear bush

Low set main hinge pin

Independent valve bank mounting

 

FEATURES

 

Compact solid rear mount design

Replaceable UHMWPE antiwear pads and bush

Sandblasted 2 pac paint

 

OPTIONS

 

SHIFTA - 400mm SIDE TO SIDE MOVEMENT

Automated Auger kit

Modified augers

Automated Rock Spike kit

90mm Rock Spike

Rock Spike post cap

Associates

White Fencing

Contact us

Phone/Fax (09) 2928 063

All About Fencing

Mobile (0274) 957 868

Email:debbie@revolutionpostdrivers.co.nz

International enquiries ph/fax 00 64 9 2928 063

Copyright 2014 - Revolution Post Drivers (LTD) NZ. All rights reserved